The mechanics workshop is available for the members of the Area and the collaborators of the Department.
It has the following tools among others:
- 2x 7drawer-trolley
- Handsaws and hacksaws
- Set of 6 files
- Set of 3 rasps
- 2x monkey wrench 8" (200mm) and 6" (150mm)
- Combination wrench set, metrics (6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm)
- Combination wrench set, inches (5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 1 ")
- Ratchet wrench set, metrics (8 9 10 12 13 14 15 16 17 18 19 22 mm)
- Ratchet wrench set, inches (3/4, 11/16, 5/8, 9/16, 1/2, 7/16, 3/8, 5/16 ")
- Open end wrench set, metrics (6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 mm)
- Open end wrench set, inches (1/4x5/16 5/16x11/32 3/8x7/16 1/2x9/16 5/8x3/4 19/32x11/16 13/16x7/8 15/16x1 ")
- Angled ring wrench set, metrics (6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 25x28 27x30 30x32 36x41 mm)
- Angled ring wrench set, inches (1/4x5/16 3/8x7/16 1/2x9/16 5/8x11/16 3/4x25/32 3/4x7/8 7/8x13/16 ")
- Ratchet 1/2"
- Straight handle for socket wrench 1/4"
- Socket wrenches 1/2" 6-sided: VDE10, VDE17, VDE12, 22, 19, 14, 12, 10mm
- Socket wrenches 1/2" 12-sided: 10, 8 mm
- Socket wrenches 1/2" with tip: T30, T27, T25, T20, PZD2, PZD3, PZD4, INHEX:9/16, 5/16, 5/8, 7/16, 1/2, 1/4, 3/8, 3/16
- Socket wrench set 1/2”, hexagonal, 24 pieces, red metal box (Heyco)
- Socket wrench set 1/2”, bihexagonal, 36 pieces, gray metak box (Heyco)
- Socket wrench set 1/4” with and without tips (Magnusson)
- Tips set (Magnusson)
- Hand rivet gun 2,4 -5mm
- Click-type torque wrench with scale (2-20NM 3/8)
- Click-type torque wrench with scale (10-100NM 1/2)
- Pliers: diagonal cut, universal, flat-nosed, round nose 90º and round nose
- Scissors
- Claw hammer
- Anti-recoil mallet
- Ball-peen hammer
- Chisels: 25, 20, 15, 10mm
- Deburrer
- Set of 6 gouges
- Vise and clamps
- Working lamps
- Metrology
- Flexometers, metal rulers (300, 500 y 1000mm), 3D and with metal plotter (305 y 152mm) squares
- Digital and analogical vernier caliper
- Standard weights set
- Dynamometer: 5kg, 1kg, 500g
- Endoscope with TFT LCD 3.5" display and recording fuction
- Set of 6 insulated screwdrivers: flathead, PH and PZ
- Screwdrivers: multi-bit, PH3x150, PH2x100, flathead
- Set of 7 drift punches: 2-8mm
- Drill-bits: HSSE, wood, spade
- Set of 7 screw-taps: M3-M12
- 2x Suction cups
- 2x Variable-speed rotary tool (Dremel) + accessories (tips, shaper/router table, extension)
- 2x Cordless drill/driver
- Power hammer drill
- Grinder
- Corded jigsaw
- Lithium rechargeable cordless screwdriver
- Circular table saw
- Table mitre saw
- Spatulas, paint rollers, brushes and drawers
- Extrusion gun
- Spiral air hose 10mm
- Regulator, filter and oiler 1/2”. Bucket capacity: 200cc
- Air compressor 200 litres 2,2 kW
- 2x Drill press
- Mechanical consumables